The cement industry is seen as a good indicator of a country’s economic growth as it is the key input material in infrastructure, development and much like the rest of the modern world, the foundation of South Africa is built on this premise, says Njombo Lekula, managing director of PPC RSA. Yet, sub-standard cement products are threatening the built environment industry and placing South African lives at risk.
During a normal market surveillance exercise whereby competitors’ products were all tested for comparison, PPC found that some products supplied by cement producers were sub-standard and warranted further investigation.
In an effort to protect the greater South African cement industry and consumer, PPC appointed, Beton-Lab, a South African National Accreditation System (SANAS) accredited independent laboratory in September 2017 to physically purchase the bags themselves in order to maintain the chain of custody and assure no interference from any outside party. Part of the process was to take photographs of each bag (front, side, back panels and bag weights) to verify Letter of Authority (LOA) numbers, cement type and strength class. The weights of the bags were checked and the EN strength testing in accordance with SANS 50197 for 2, 7 and 28 days was performed.
The South African Bureau of Standards (SABS) prescribed uncertainty of measurement allowance of 2.5% was applied when analysing the resultant data. The results show the inability to produce a consistent quality product and thwarting of standards. Alan De Kock, MD of Beton-Lab says, “As an independent laboratory our work is tightly controlled, ensuring accurate data that is in no way influenced by outside parties.”
Non-performance of cements tested
The report was recently released and the findings were shared with the SABS and the National Regulator for Compulsory Specifications (NRCS), showing continued non-performance of the cements tested. According to Lekula, non-conformity of strength and weights of some products ranged from 11% to 73% of the sample set. “This failure to conform to local standards not only has an impact on the structural integrity of buildings, but also poses a threat to possible damage of property and even loss of life should the walls come tumbling down.”
It was also found that most of the sub-standard cement products carry the SABS mark. The SABS stamp is a mark of regulatory approval, instilling trust in the product being sold and, if used in accordance with the instructions, will result in a structure that is robust and safe.
Stringent internal quality regulations
Local cement producers have stringent internal quality regulations in place to ensure compliance of their products. However, with cement producers supplying the market with sub-standard extended products, Lekula questions the long-term effect on the South African built environment as well as the sustainability and impact on our infrastructure. With non-compliance of quality and durability standards, consumers are unaware of the risk they face.
It takes up to 28 days for cement to develop strength and fly ash does not start developing strength before 28 days. The durability of mortar or concrete is primarily dictated by the amount and the strength performance of the cement that is used.
Retailers, builders and construction companies are also at risk of future legal action or loss of income as selling and using these sub-standard products can have a negative effect on the perception consumers have of their businesses and standards.
Lukela concludes, “The use of sub-standard cement products has been identified as one of the main causes of building collapse globally. PPC has decided to take a stand against sub-standard cement products to ensure the safety of consumers and longevity of structures.”